CIERS1 Cisco Expert-Level Training for CCIE Routing and Switching v5.0

Candidates for the CCIE Routing & Switching practical exam who are three to six months out from the date.

Prerequisite

  • CCIE Routing and Switching candidates are expected to have an in-depth understanding of the topics in the exam blueprints and are strongly encouraged to have three to five years of job experience before attempting certification
  • CCNP Routing and Switching or equivalent job experience
  • Passing score on CCIE Routing and Switchinng written exam #350-001

Expected Duration
5 day

Description

This intensive Boot Camp-style course is designed to help CCIE Routing & Switching candidates determine exactly where they are in their process of preparing for the CCIE R&S v5.0 practical exam and to fill technology gaps through lecture and labs.

The class is approximately 60% lecture and 40% hands-on labs, with extended hours of up to 13 hours per day. Upon completion of the technology lecture that includes best practices for applying and troubleshooting the technology, you will complete labs based on that technology. At the end of the class, you will perform two graded CCIE-level practice labs: a troubleshooting lab and a configuration lab.

Additionally, you will learn how to develop study plans and how to develop and use checklists and decision diagrams to formulate the mindset needed to pass the CCIE lab. With this information stored in your online portal, you can review the material covered in the CIERS1 class as frequently as you wish.

The Cisco 360 program has exclusive rights to run all labs on top of IOS over Linux (IOL). These are the same servers, same look and feel as the actual lab.

Note: To participate in this course and access your Cisco 360 portal and remote labs, it is highly recommended that you bring the laptop associated with your Cisco 360 Learning Program for CCIE account.

Objective

1. Introduction

2. Lab Strategies

3. 7-Hour Core Assessed Lab (360RSW05-LAB-CA01)

  • DMVPN and Serial Communications
  • Switch Configuration
  • IPv4 OSPF
  • IPv4 EIGRP
  • IPv4 RIP
  • Redistribution
  • BGP

4. DMVPN

5. Layer 2 Configuration (Switching, HDLC and PPP)

6. IGPs – RIPv2, EIGRP/EIGRP6, OSPFv2/v3

7. Redistribution

8. BGP for IPv4 and IPv6

9. Advanced BGP Concepts

10. MPLS and Layer 3 VPN

11. IP Multicasting

  • DENSE Mode
  • SPARSE Mode
  • Attaining Universal Multicast Connectivity
  • IANA Reserved Multicast Addresses

12. Quality of Service

  • Deploying Quality of Service on a Cisco Network
  • QoS Simulation

13. Network Services – NTP, NAT, DHCP and FHRP

14. 3-Hour Assessed Troubleshooting Lab (Part 1 – 360RSW05-LAB-GA02)

  • 11 Incidents (Trouble Tickets)

15. Six-Hour Configuration Assessed Lab (Part 2 – 360RSW05-LAB-GA02)

  • DMVPN and Serial Communications
  • Switch Configuration
  • IPv4 OSPF
  • IPv4 EIGRP
  • IPv4 RIP
  • BGP
  • IPv6 Routing
  • Security
  • QoS
  • DHCP
  • Address Administration
  • Gateway Redundancy
  • Multicast
  • MPLS

SUBSCRIPTION COST


$4,595.00

Select Course Options

 

NEED HELP OR NOT SURE?