Cisco ISCW 1.0: Configuring the CPE and Verifying Broadband ADSL

This course is included in our On-demand training solution.

Overview

To configure a network of hosts over a bridging DSL CPE access device to an aggregate router and verify broadband ADSL configurations for Layer 1 and Layer 2

Target Audience

Network administrators; network engineers; network managers; systems managers; network designers who wish to validate their ability to install, configure and troubleshoot converged local and wide area networks with 100 to 500 nodes

Prerequisites

Completion of the course Interconnecting Cisco Network Devices (ICND)

Expected Duration

115 min.

Course Objectives

Cisco ISCW 1.0: Configuring the CPE and Verifying Broadband ADSL

  • recognize how to configure the PPPoE client and PAT.
  • recognize how to configure and verify DHCP and static default routes.
  • recognize how to verify a PPPoE configuration, and how to configure PPPoA and the DSL ATM Interface.
  • configure a Cisco ADSL router as a PPPoE client in a given scenario.
  • identify if Layer 1 is causing a failed ADSL service.
  • identify if Layer 2 is causing a failed ADSL service.
  • SUBSCRIPTION COST



     

    NEED HELP OR NOT SURE?