Implementing Cisco IP Switched Networks (SWITCH) 2.0

  • 12 months access to live and recorded classes
  • Classes taught by industry experts
  • Hands-on labs
  • Practice exam
  • Class notes
  • Comprehensive Student Guide
  • Expert mentoring available to anwser questions
  • Personal Success Advisor to help you reach your training goals


The Interconnecting Cisco Network Devices Part 1 (ICND1) course is the first step into Cisco networking. The goal of this course is to provide students with the key, fundamental skills, needed to successfully configure, operate, and maintain Cisco routers and switches. Students who have attended the ICND1 course will gain competency with Cisco IOS-based devices and ISR-capable routers. Crucial elements of this course include the coverage of IPv4 subnetting, ACLs, VLANs, as well as Static and Dynamic Routing which are all needed for success at all levels of Cisco certification. IPv6 is also introduced with a focus on static routing and OSPFv3. ICND1 should be considered a prerequisite for entry into ICND Part 2.This course is preparation for both the CCNA Routing and Switching and Cisco Certified Entry Networking Technician (CCENT) exams. Students pursuing the CCNA Routing and Switching certification should attend parts 1 & 2 of the ICND courses.


Students attending this course should have a solid foundation in routing fundamentals, Cisco IOS basics, and Cisco routing basics. Attending the ICND1 and ICND2 classes or having the CCNA certification will fulfill these expectations.


This course offers the official training for the Implementing Cisco IP Switched Networks 2.0 certification exam which is a component exam for the CCNP and CCDP certifications. Passing this exam will also refresh CCNA certification, which expires after three years.


300-115 SWITCH 2.0

Included labs

  • Verifying Connectivity
  • Changing SDM Templates
  • Enabling LLDP
  • Creating VLANs
  • Assigning Switchports to VLANs
  • Configuring Trunks from ASW1 to DSW1 and DSW2
  • Configuring Trunks from ASW2 to DSW1 and DSW2
  • Configuring Trunks between DSW1 and DSW2
  • Modifying the Native VLAN on 802.1q trunks
  • Controlling VLANs on Trunks
  • Configuring Voice VLANs
  • Configuring VTP
  • Configuring Etherchannel Between DSW1 and DSW2
  • Modifying Etherchannel Load Balancing Algorithm
  • Configuring Rapid Spanning Tree Protocol
  • Manipulating STP Cost
  • Manipulating STP Port Priority
  • Enabling Portfast and BPDUGuard
  • Enabling BPDUFilter and RootGuard
  • Configuring Loop Guard and UDLD
  • Configuring MSTP
  • Manipulating MSTP Root Bridge and Port Cost
  • Configuring InterVLAN Routing
  • Creating SVIs
  • Enabling IPv4 Routing on a MLS
  • Creating Routed Ports on an MLS
  • Enabling Routing Protocols on an MLS
  • Configuring an MLS as a DHCPv4 Server
  • Configuring Manual DHCPv4 Bindings
  • Configuring an MLS as a DHCPv4 Relay Agent
  • Configuring an MLS as a Stateless DHCPv6 Server
  • Configuring NTP
  • Configuring SNMPv3
  • Configuring IPSLA
  • Configuring SPAN and RSPAN
  • Configuring HSRP
  • Configuring HSRP Interface Tracking
  • Configuring VRRP
  • Configuring GLBP
  • Configuring Port Security
  • Configuring Err-Disable Recovery
  • Configuring Storm Control
  • Configuring DHCP Snooping
  • Configuring DAI
  • Configuring IP Source Guard
  • Configuring AAA Authentication
  • Configuring 8021x Port Based Authentication
  • Implementing VACLs
  • Implementing Protected Ports
  • Implementing PVLANs


  • Module 1: Basic Concepts and Network Design
  • Module 2: Campus Network Architecture
  • Module 3: Spanning Tree Implementation
  • Module 4: Configuring Inter-VLAN Routing
  • Module 5: Implementing High Availability Networks
  • Module 6: First Hop Redundancy Implementation
  • Module 7: Campus Network Security

Target Audience

This course is intended for students who are looking for real-world switching knowledge, and those that are considering CCNP and CCDP certification. This course’s discussion of switching could also benefit early CCIE Routing and Switching candidates.

Expected Duration

40 Hours