Cisco CIPT2 6.0: Centralized Call-Processing Redundancy

This course is included in our On-demand training solution.

Overview

The capability to use centralized call-processing devices located at remote sites depends on the availability of Cisco Unified Communications Manager at the main site. To provide these devices with a backup, Media Gateway Control Protocol (MGCP) fallback and Cisco Unified Survivable Remote Site Telephony (SRST) can be used. This course describes the mechanisms for providing call survivability and device failover in remote sites. It also describes how to configure Cisco IOS routers as SRST gateways and how to use Cisco Unified Communications Manager Express in SRST mode. This course is one of a series from two SkillSoft learning paths, which cover the objectives for Cisco exam 642-456 CIPT2. This exam is one of five required qualifying exams for the CCVP (Cisco Certified Voice Professional) certification.

Target Audience

The primary audience for this learning path will be a range of established IT professionals. They will have a thorough understanding of network and Cisco technology basics, and so good computer literacy along with a solid technical acumen can be assumed; individuals seeking the Implementing Cisco Unified Communications IP Telephony certification and those individuals targeting the Cisco Certified Voice Professional (CCVP) certification.

Prerequisites

Working knowledge of converged voice and data networks; working knowledge of MGCP, SIP, and H.323 and their implementation on Cisco IOS gateways; ability to configure and operate Cisco routers and switches; ability to configure and operate Cisco Unified Communications manager in a single site environment; Cisco ICND1 v1.0, Building Cisco Multilayer Switched Networks (BCMSN) v3.0, Cisco Voice Over IP (CVOICE) v6.0, and CIPT1 v6.0.

Expected Duration

90 min.

Course Objectives

Remote-Site Redundancy Options

  • identify the capabilities of different remote-site redundancy technologies.
  • An Overview of SRST and MGCP Fallback

  • identify the elements of Cisco Unified SRST and MGCP fallback operation.
  • identify the dial plan requirements for MGCP fallback and SRST scenarios.
  • Implementing SRST and MGCP Fallback

  • recognize the configuration requirements for MGCP fallback and Cisco Unified SRST.
  • identify the steps for configuring SRST and MGCP fallback on the Cisco IOS gateway.
  • Configuring Cisco Unified SRST and MGCP Fallback

    SRST Dial Plans and Special Features

  • identify the SRST dial plan components and commands that apply in different situations.
  • recognize the telephony features supported by Cisco Unified SRST.
  • CUCM Express Overview and Features

  • identify the elements and features of a CUCM Express deployment.
  • CUCM Express Configuration

  • identify the steps for performing a general configuration of Cisco Unified Communications Manager Express.
  • identify the steps for configuring Cisco Unified Communications Manager Express for SRST mode.
  • SUBSCRIPTION COST



     

    NEED HELP OR NOT SURE?