Cisco FIREWALL 2.0: Configuring Cisco ASA NAT Features

This course is included in our On-demand training solution.

Overview

The Cisco ASA adaptive security appliance provides support for Network Address Translation (NAT) to solve addressing issues when your internal networks are interconnecting with external networks. NAT translates the source and destination IP addresses of traffic that is going through the security appliance. NAT often works together with the Port Address Translation (PAT) feature, which translates source ports in addition to IP addresses and enables many internal hosts to share one public IP address. This course describes the configuration, verification, and troubleshooting procedures that you use to implement NAT and PAT on the Cisco ASA security appliance.

Target Audience

Anyone wishing to obtain the Cisco Certified Network Professional CCNP Security designation. Cisco Network Security Engineers responsible for the selection, configuration, and troubleshooting of the majority of Cisco ASA adaptive security appliance perimeter security features to reduce risk to IT infrastructure and its applications within their networking environments. Established IT professionals with a good understanding of networking and Cisco technology, installation, troubleshooting, and monitoring of devices used to maintain integrity, confidentiality, and availability of data and network devices that Cisco uses in its security infrastructure, as well as working knowledge of the Microsoft Windows operating system. Candidates who have completed the Cisco Certified Network Associate (CCNA) Certification and the Cisco Certified Network Associate Security Certification (CCNA Security).

Prerequisites

Expected Duration

90 min.

Course Objectives

NAT on Cisco ASA Software Version 8.2 and Earlier

  • describe how NAT works on Cisco ASA Software Version 8.2 and earlier
  • recognize how to implement NAT on Cisco ASA Software Version 8.2 and earlier in a given scenario
  • identify the considerations for managing NAT on Cisco ASA Software Version 8.2 and earlier
  • NAT on Cisco ASA Software Version 8.3 and Later

  • describe how NAT functions on Cisco ASA security appliances with Cisco ASA Software Version 8.3 and later
  • Configuring Auto NAT

  • describe how the basic auto NAT configurations work on the Cisco ASA security appliance
  • Configuring Manual NAT

  • describe how to configure NAT on the Cisco ASA security appliance using manual NAT
  • Tuning and Troubleshooting NAT on Cisco the ASA

  • describe how to tune and troubleshoot NAT on the Cisco ASA security appliance using the Cisco ASDM and CLI tools
  • SUBSCRIPTION COST



     

    NEED HELP OR NOT SURE?