Cisco TSHOOT 2.0: Troubleshooting IPv4 and IPv6 Addressing and Routing

This course is included in our On-demand training solution.

Overview

When troubleshooting IP addressing and routing issues, you might need to determine a client’s IPv4, IPv6, and MAC addresses. The method of obtaining this addressing varies with operating system.
There are a number of ways in which to assign IP addresses to devices throughout the network as well as numerous ways to verify an address depending on issue at hand.
This course describes the ways in which to assign IPv4 and IPv6 addresses to various hosts as well as how to troubleshoot the various IP address assignment methods. Troubleshooting IPv4 and IPv6 basic routing is also covered.

Target Audience

Professionals who work in complex network environments desiring the skills they need to maintain their networks and to diagnose and resolve network problems quickly and effectively. The TSHOOT learning path will provide information about troubleshooting and maintaining particular technologies, as well as procedural and organizational aspects of the troubleshooting and maintenance process. A large part of the training will consist of practicing these skills and reinforcing the concepts by putting them to use in a controlled environment. At the end of the learning path, you should have increased your skill level and developed a set of best practices that are based on your own experience that you can take back to your organization.

Prerequisites

None

Expected Duration

120 min.

Course Objectives

Course Introduction

Verifying Client Addressing

  • verify a client’s address
  • Verifying Router Addressing

  • identify the commands used to verify router addressing
  • Validating Two Hosts are in the Same Subnet

  • identify methods to validate hosts
  • Troubleshooting Static and Dynamic Address Assignment

  • identify the different address assignment methods you may be required to troubleshoot
  • Address Assignment Issues: Static IPv4

  • troubleshoot a static IPv4 address assignment issue
  • Address Assignment Issues: DHCPv4 I

  • troubleshoot a DHCPv4 address assignment issue
  • Address Assignment Issues: DHCPv4 II

  • troubleshoot a DHCPv4 address assignment issue on a switch
  • Address Assignment Issues: Static IPv6

  • troubleshoot a static IPv6 address assignment issue
  • Address Assignment Issues: SLAAC (IPv6)

  • troubleshoot a static SLAAC assignment issue
  • Address Assignment Issues: Stateless DHCPv6

  • troubleshoot a stateless DHCPv6 assignment issue
  • Address Assignment Issues: Stateful DHCPv6

  • troubleshoot a stateful DHCPv6 assignment issue
  • Using ping and traceroute

  • identify the use of the ping and traceroute commands
  • ping Example

  • verify connectivity using ping
  • ping Echo-reply Interpretation

  • analyze an extended ping output
  • traceroute Example

  • analyze traceroute output
  • traceroute Codes

  • describe the different traceroute codes
  • Verification Commands for IPv4 and IPv6 Addressing

  • identify commands that can be used to troubleshoot IPv4 and IPv6 addressing on devices
  • IPv4 Static Routing Issues

  • identify issues that can arise with static routing
  • Proxy ARP and Administrative Distance

  • troubleshoot a proxy ARP issue
  • IPv6 Static Routing Issues

  • identify static IPv6 routing issues
  • Multiple Routing Sources

  • troubleshoot a multiple source issue
  • Troubleshooting IPv6

    COURSE COST



     

    NEED HELP OR NOT SURE?