ICND2 2.0: Implementing a Scalable, Multiarea Network, OSPF Based Solution

This course is included in our On-demand training solution.

Overview

OSPF routing protocol supports a two-tier hierarchical structure. By utilizing a two-tier or multiarea OSPF design, you can increase the network scalability and reduce the load and utilization on routers due to fewer SPF calculations and smaller routing tables. This course first describes differences between single-area and multiarea OSPF design. The course describes how OSPF implementation should be planned as well as describes how to configure and verify multiarea OSPF design in an IPv4 network.
OSPF is a link-state routing protocol and therefore it scales well with a growing network. However, this scalability introduces complexity in design, configuration, and maintenance. This course introduces OSPF neighbor states, which are important when troubleshooting OSPF adjacencies. It explains some of the common issues that arise with an OSPF network, provides a flow chart approach to troubleshooting these issues, and offers troubleshooting recommendations.
OSPF is a widely used IGP. Upgrading the protocol to support IPv6 generated a number of significant changes to how the protocol behaves. Understanding the differences between OSPFv2 and OSPFv3 is required for the successful deployment and operation of an IPv6 network that is using OSPF for routing. This course ends by describing OSPFv3, which is the IPv6-capable version of the OSPF routing protocol, and describes its operations and implementation.

Target Audience

Anyone wishing to obtain Cisco Certified Network Associate (CCNA) 200-120 certification that validates the knowledge and skills required to install, operate, and troubleshoot a medium-sized network, including connecting to a WAN and implementing network security. Interconnecting Cisco Network Devices Part 2 (200-101 ICND2) is an essential course for students preparing for the CCNA Routing and Switching certification or the ICND2 certification. Students pursuing the CCNA Routing and Switching certification should attend parts 1 & 2 of the ICND course. Network administrators, network engineers, network managers, network designers, and project managers. Familiarity with network fundamentals, implementing local-area networks, Internet connectivity, managing network device security, implementing WAN connectivity and basic IPv6 connectivity is recommended.

Prerequisites

Expected Duration

90 min.

Course Objectives

Single-Area and Multiarea OSPF Planning

  • match single-area and multiarea OSPFs with their descriptions
  • Multiarea OSPF Configuration

  • describe commands used to configure a multiarea OSPF
  • Multiarea OSPF Verification

  • describe commands used in verifying OSPFs
  • Configuring Multiarea OSPF

    Troubleshooting Neighbor Issues

  • identify potential causes of OSPF neighbor issues
  • Troubleshooting Routing Table and Path Selection Issues

  • identify how to troubleshoot OSPF routing table issues
  • Troubleshooting a Multiarea OSPF Environment

    OSPFv3 Key Characteristics

  • describe the key characteristics of OSPFv3
  • OSPFv3 Configuration

  • configure OSPFv3
  • verify OSPFv3 configuration
  • Configuring OSPFv3 for Multiarea OSPF

    SUBSCRIPTION COST



     

    NEED HELP OR NOT SURE?